.\" =()<.ds a @@>()= .ds a /var/spool/news .\" =()<.ds b @@>()= .ds b /usr/local/newsbin .\" =()<.ds c @@>()= .ds c /usr/local/lib/news .\" =()<.ds m @@>()= .ds m usenet .TH NEWSBATCH 8 "27 April 1992" .BY "C News" .SH NAME sendbatches, batchsplit \- news batching to other sites .br batcher, batchih, batchsm, batchra \- news-batch preparation .br comp, comp12, nocomp, compcun, compc7, compb \- news-batch compression .br c7encode, bencode \- compressed-news-batch encoding .br viauux, viauuxz, viauuxcun, viauuxl \- news-batch transmission via uucp .br viamail, viaemail, viapmail \- news-batch transmission via mail .br viainews, viarsh, vianowhere \- news-batch transmission by misc. means .SH SYNOPSIS .B \*b/batch/sendbatches [ .B \-p ] [ site ... ] .PP .B \&.../batchsplit batchsize .br .B \&.../batcher listfile .br .B \&.../batchih listfile .br .B \&.../batchsm listfile .br .B \&.../batchra listfile .br .B \&.../comp .br .B \&.../comp12 .br .B \&.../nocomp .br .B \&.../compcun .br .B \&.../compc7 .br .B \&.../compb .br .B \&.../c7encode .br .B \&.../bencode [ file ] .br .B \&.../viauux site .br .B \&.../viauuxz site .br .B \&.../viauuxcun site .br .B \&.../viauuxl group .br .B \&.../viamail site .br .B \&.../viaemail site .br .B \&.../viapmail site .br .B \&.../viainews site .br .B \&.../viarsh site .br .B \&.../vianowhere site .SH DESCRIPTION .I Sendbatches administers batched transmission of news to other sites. It should be run periodically, under userid \fInews\fR, by \fIcron\fR(8) or similar means. It prepares and sends batches of news, subject to restrictions on available space and length of outbound queues. .PP Normally, .I sendbatches does locking to ensure that only one .I sendbatches is running at a time. The .B \-p option suppresses the locking and permits parallel .I sendbatches runs, although lower-level locking is done to ensure that only one is trying to prepare batches for any particular site at a given time. Parallel .I sendbatches runs impose very heavy system loads but may be useful to systems with extensive hardware parallelism and many outbound news feeds. .PP Each site that can have batches sent to it needs a \fIsite\fR directory under \fI\*a/out.going\fR. If \fIsendbatches\fR is invoked with specific \fIsite\fRs given, it considers batching for those sites, only, in that order. By default, \fIsendbatches\fR consults the \fIbatchparms\fR file (see below) to determine what to do: If there is a \fB/default/\fR entry in \fIbatchparms\fR, \fIsendbatches\fR will consider batching for all sites that have directories in \fI\*a/out.going\fR, in oldest-first order by modification time of the directory. If there is no \fB/default/\fR entry, \fIsendbatches\fR considers batching for those sites named in \fIbatchparms\fR, in the order named. .PP To use the batcher, names of files to be sent to a specific site should be appended to a \fItogo\fR file in its \fIsite\fR directory. The batcher expects the lines in \fItogo\fR to have two fields, a filename (as a full pathname, or relative to \fI\*a\fR) of an article and its size in bytes. A missing size field is arbitrarily assumed to be a default average. .PP \fISendbatches\fR uses a number of auxiliary programs to do the real work. The search path it uses to find them includes, in order, the \fIsite\fR directory for the site in question, \fI\*c/bin\fR, and \fI\*b/batch\fR. This permits per-site and per-news-database overrides of the default behaviors. \fISendbatches\fR provides all these programs with environment variables \fBNEWSSITE\fR, containing the name of the site that batches are being prepared for, and \fBNEWSSITEDIR\fR, containing the full pathname of the \fIsite\fR directory, in case these are useful in customization. .PP The names of most of the auxiliary programs, and some other parameters, are taken from the file \fI\*c/batchparms\fR, an ASCII text file. Empty lines and lines starting with `#' are ignored. Other lines specify the behavior for sites, one line per site. A site line is six fields, separated by white space. The first field is the site name; a line whose site name is \fB/default/\fR specifies what parameters should be used for sites not explicitly mentioned. (The presence or absence of such a line also influences the behavior of \fIsendbatches\fR when invoked without arguments; see above.) The second field is the size of batches to be prepared (before compression), in bytes. The third field is the maximum length of the output queue for transmission to that site. The fourth, fifth, and sixth fields are the names of the programs to be used to build, compress, and transmit (respectively) batches to that site. .PP For each site being considered for batches, \fIsendbatches\fR first determines whether there are in fact any articles to be batched. Assuming there are, \fIsendbatches\fR then finds the \fIbatchparms\fR line for that site and invokes \fIqueuelen\fR (see \fInewsaux\fR(8)) to find out the size of the outbound queue for the site. \fISendbatches\fR limits the number of batches prepared to the minimum of the limits implied by queue lengths and available space. .PP \fISendbatches\fR uses \fIbatchsplit\fR as necessary to slice chunks out of the \fItogo\fR file, each chunk containing the \fItogo\fR lines for a batch limited to the specified size. Exception: a single article bigger than the specified size will still go out as one batch. .PP Each chunk is then processed through a batch preparer (typically \fIbatcher\fR), which assembles the articles into a batch, a batch compressor (typically \fIcompcun\fR), which performs compression and/or any other auxiliary processing needed, and a batch transmitter (typically \fIviauux\fR), which sends the batch on its way (e.g. enqueues it for transmission). The preparer is run with \fI\*a\fR as the current directory, so non-absolute pathnames in the chunk are valid filenames; the others are run in the \fIsite\fR directory for easier access to site-specific customization files. .PP Batch preparers in the standard distribution are: .RS .IP batcher 9 normal batching .IP batchih \fIihave\fR-sending part of uucp ihave/sendme (not to be confused with NNTP) .IP batchsm \fIsendme\fR-sending part of ihave/sendme .IP batchra requested-article-sending part of ihave/sendme .RE .PP .IR Batchih , .IR batchsm , and .I batchra have to map from the phony ``site name'' given in their \fIbatchparms\fR line to the name of the site they should actually send to; they do this by stripping off the last `.' and everything that follows (usually `.ihave' or `.sendme' respectively, but on machines which limit the size of filenames these may have to be shortened). .PP Caution: .I batchih and .I batchsm do their work by constructing an article and feeding it to .IR inews , which means that the batch size must be within what .I inews will accept (see .IR inews (1)). .PP Batch compressors in the standard distribution are: .RS .IP comp 9 ordinary compression .IP comp12 12-bit compression (for sites with limited decompression ability) .IP compcun compression plus the silly B-news-compatible `#!\ cunbatch' header .IP nocomp pass data straight through, no compression .IP compc7 compression plus 7-bit encoding using \fIc7encode\fR .IP compb compression plus very conservative 6-bit encoding using \fIbencode\fR .RE .PP Batch transmitters in the standard distribution are: .RS .IP viauux 10 normal transmission via UUCP .IP viauuxz like \fIviauux\fR except with \fB\-z\fR option given to \fIuux\fR (for old UUCPs where don't-report-result-on-zero-status is not default) .IP viauuxcun like \fIviauux\fR except it invokes \fIcunbatch\fR rather than \fIrnews\fR at the other end (for some very old news sites) .IP viauuxl multicast transmission using the \fB\-l\fR option of \fIuux\fR (not found on all systems) to send the same batch to all systems listed in the file `\*c/sites.\fIgroup\fR' .IP viamail mail the batch to \fIsite\fB!rnews\fR .IP viaemail mail the batch to \fIsite\fB!enews\fR .IP viapmail mail the batch to \fIsite\fB!rnews\fR, attempting to protect an unencoded batch against the vagaries of mailers .IP viainews feed the batch back to \fIinews\fR, ignoring the \fIsite\fR argument (normally useful only for ihave/sendme) .IP viarsh use \fIrsh\fR to run \fIrnews\fR on the \fIsite\fR via Ethernet, Internet, etc. (the directory containing \fIrnews\fR must be in the default PATH on \fIsite\fR) .IP vianowhere dummy transmitter for batchers like .I batchra that don't need a real one .RE .PP .I C7encode encodes 8-bit data from standard input into a 7-bit form optimized for transmission by uucp `f' protocol. The encoding is complex and bizarre. .PP .I Bencode takes 8-bit data from the named source file (the default is standard input) and encodes it using only the ASCII characters ``A'' \- ``Z'', ``a'' \- ``z'', ``0'' \- ``9'', ``+'', and ``-''. The ASCII characters blank, newline, and ``/'' also appear in the encoded file, but do not represent encoded bits. The encoded file is terminated with a byte count and cyclic redundancy check for detecting corrupted files. This ought to suffice to get data through almost any network. .PP \fISendbatches\fR logs some information about sites with backlogs in \fI\*c/batchlog\fR (see also \fInewsdaily\fR(8)). This is intended to help detection and diagnosis of flow problems. .SH FILES .ta \w'\*a/out.going/*/LOCK'u+2n .nf \*c/LOCKbatch overall lock for \fIsendbatches\fR \*c/LOCK overall news lock (used by \fIbatchsplit\fR) \*c/L.* lock temporaries \*a/out.going/* batch directories \*a/out.going/*/LOCK per-site locks \*a/out.going/*/L.* per-site lock temporaries \*c/batchparms parameter file \*c/sites.* \fIviauuxl\fR multicast lists also see text .SH SEE ALSO inews(1), compress(1), uux(1), relaynews(8), rnews(8) .SH DIAGNOSTICS Complaints, if any, from \fIsendbatches\fR and its auxiliaries are mailed to `\*m'. .SH HISTORY Written at University of Toronto as part of the C News project. A number of the ideas came from Chris Lewis, who was then with Motorola. .I Bencode written at University of Waterloo by Reg Quinton and Ken Lalonde. .SH BUGS \fISendbatches\fR estimates available space without considering the effects of compression; this is usually too conservative. .PP \fIViapmail\fR is obsolescent; \fIviaemail\fR with a batch encoded with \fIbencode\fR is vastly superior. .PP Queue-length limiting does not work for \fIviauuxl\fR because \fIqueuelen\fR (see \fInewsaux\fR(8)) does not know about multicast groups. Also, \fIviauuxl\fR has not been tested well. .PP .I Viarsh does not incorporate a spooling subsystem, so a slow site stalls the entire batching system and a non-responding site loses news. It is not recommended for bulk transmission or where high reliability is essential.